Black mold in the bathroom - how to get rid of this trouble? The process will be long and difficult, and many housewives do not know how to get it out between the tiles on the wall - one of the most vulnerable places that suffers first. To effectively and quickly deal with fungus, you need to understand why it appears so often.
Fungus accumulates on walls, in corners, between tiles and other places.
If you see black growths on the walls, in corners, between tiles and other places, then these are traces of fungal growth. It is transported by air and can enter an apartment on people, animals, or things. If you don’t start getting rid of it, then each time it will spread over all surfaces, and in this case it will be extremely difficult to remove it. The shower room is the most favorable place for fungus to grow, since it is there that high humidity and the absence of ultraviolet rays prevail. Ultraviolet light kills fungal spores, and humidity is a favorable environment for its reproduction. Removing mold in the bathroom takes time and regular preventive measures.
Also, improper operation of the hood or its absence can cause the lesion to actively grow. Due to the fact that it is possible to completely destroy fungus in the bathroom only by eliminating high humidity in the room, you will have to change the ventilation. The fact is that powerful ventilation ensures air circulation, and fungal spores cannot cling to the surface. That is why there is most mold in hard-to-reach, closed places. In addition, the heated towel rail should work both in winter and summer. Since after swimming or washing, condensation remains on the surfaces, which provokes the appearance of fungus. Most often it is found in the space between tiles, in shower stalls, and in the bathroom. Particular attention is paid to hard-to-reach places where a lot of moisture accumulates. Improper operation of plumbing is also a source of excess moisture. If this problem is not resolved, then attempts to deal with the problem will not bring any results.
Why delete it?
The first and main reason is the detrimental effect on the human body, and therefore the problem of how to remove black mold in your bathroom should be solved first. Fungal spores can enter the body through airborne droplets, skin contact, and ingestion of moldy food through the esophagus. Some types of mold are particularly toxic and can cause serious illnesses and allergic reactions, such as:
The second reason is the aesthetic factor. Even on new plumbing, it multiplies without difficulty and black growths spoil the overall appearance of the shower room. Therefore, this problem must be taken seriously and not neglected, since the fungus multiplies very quickly, and after each bath there is more and more of it. How to deal with mold in the bathroom is described below.
And so, it’s time to figure out how to remove mold in the toilet or bathroom in the tile seams and other places. Due attention should be paid to the issue of safety - work only with gloves and wear a special anti-dust mask; it is also recommended to have safety glasses. If there is a lot of mold and it has become deeply embedded in the surface, then you need to use a respirator. Also, do not use a vacuum cleaner without a special HEPA filter, it can spread fungal spores through the air and only worsen the situation. Fungus in the bathroom - how to get rid of such a lesion? Housewives are often concerned about how to clean the seams in the bathroom from mold, because it spreads quite quickly and it is difficult to remove it from the seams in the corners.
Before you begin the removal procedure, you need to isolate the room so that fungal spores do not scatter throughout the apartment. First, open access to fresh air if there is a window. If there is sufficient air circulation, the spores will not be able to settle. Secondly, close the door tightly.
Methods to combat this problem vary depending on the size of the affected area. If the process has just begun and there is not much mold, then it will be enough to scrape off the affected area, dry it well and finally apply an antiseptic to the area. A common place for fungus in the bathroom is on the seams of the tiles - since it is especially difficult to get rid of it, it is better to use a spray bottle. So, how to get rid of mold in the bathroom at home - consider natural and chemical influences.
Baking soda has good cleansing properties.
Hydrogen peroxide
It is a well-known antiseptic and antifungal agent widely used in every home. 3% hydrogen peroxide is sold at the pharmacy and can simply be applied to the affected area. On colored surfaces, you need to try peroxide on a small area, because peroxide, like soda, has bleaching properties. Since it is quite difficult to clean mold, it is necessary to thoroughly rub the problem area and rinse well.
Vinegar
Vinegar can be found in every kitchen and can be used to get rid of infestations quickly and effectively. Its action is similar to bleach, but unlike it, vinegar does not emit harmful fumes. It is better to apply it using a spray bottle and wipe with a damp cloth. After an hour, the treated surface should be rinsed well with water and the room should be ventilated. For prevention, it is recommended to spray with vinegar several times a week.
Borax
Borax is a white powder, a natural ingredient that will help to permanently solve the problem of how to remove fungus in the bathroom. Borax is a good working product and has a disinfectant and antifungal effect. To prepare the borax mixture, you need the following:
- 300 ml. borax;
- 4 liters of warm water;
- spray;
- brush.
Mix borax and water, stir well until completely dissolved. Spray the solution onto the affected area and scrub thoroughly with a brush. You can also make it thicker.
Hydrogen peroxide is a well-known antifungal agent. 
Vinegar must be applied using a spray bottle.
If the situation is in a bad state, then many give up completely, and it is no longer clear how to remove mold in the bathroom completely and forever. But there are other, more radical and expensive methods.
Air ionization
If all the previous methods did not help, it makes sense to trust a professional. This process requires contacting a specialist who has been trained; you cannot do this procedure yourself. It consists in sending a stream of air to the desired location, which contains ions that destroy fungal spores. This service is quite expensive, but very effective. This method is also suitable if you don’t know how to remove large quantities of fungus in the bathroom between the tiles on the wall. In addition to mold, air ionization will help get rid of some insects.
Microwave
Are you wondering how to clean your bathroom tiles 100% of mold and mildew? In order to completely remove mold, the microwave method is best suited. It is also performed by specialists. Its meaning is that millimeter frequencies heat the surface and under this influence almost all types of mold die. This includes multi-colored mold and rot. This method is considered radical and eliminates the problem completely, but this does not mean that after it is carried out, prevention can be neglected. It will also help get rid of insects.
Capital measures
If large areas are affected, it becomes impossible to cope with it locally. Moreover, if you don’t know how to clean the mold in your bathroom between the tiles on the wall, in this case you will need to remove the plaster and treat the surface with antifungal agents. These can be either natural, folk remedies, or more aggressive ones, which are sold in hardware stores. After everything has been carefully processed, be sure to dry the area and ventilate the room, then you can begin restoration. Unfortunately, advanced cases are not subject to local cleaning, and only complete scraping is the best remedy for mold in the bathroom.
It is not at all necessary to spend money on expensive products; first you should try to act on your own, not forgetting the safety rules.
In advanced cases, you can remove the plaster and treat the surface with antifungal agents.
Copper sulfate
If you don’t want to spend money on repairs and ionization, but don’t know how to get rid of fungus in the bathroom at home without spending a lot of money, copper sulfate comes to the rescue. This product can be bought in the store. It is worth noting that it is toxic. The main rule when using is to comply with safety measures (work with rubber gloves, wear a respirator) and completely remove residues.
Mixtures
Today, the range of ready-made solutions and mixtures for cleaning plumbing fixtures is extensive. Mold removal in different places is done in different ways, so you need to consult with the seller, for example, how to treat the walls in the bathroom from fungus and mold. He will help you choose the right product and tell you what and how to destroy fungus in the bathroom.
Prevention of occurrence
Of course, it is better to prevent a problem than to fix it. Therefore, even if mold removal work has been carried out, important rules must be followed in the future, without which the problem may return.
- It is necessary to constantly eliminate sources of excess moisture. The heated towel rail should work, leaking taps should be eliminated, and fresh air should be regularly allowed into the room. After a shower, the door should be open for some time. It is also not recommended to dry items after washing; they create an additional humid environment.
- Carefully monitor the operation of the hood - it must be clean and circulate air well.
- Don’t neglect the container for toothbrushes, because water often stagnates there, and subsequently the brushes become covered with black fungus.
- Throw away moldy food immediately to avoid the spread of fungus throughout the apartment.
- Condensation may accumulate on cast iron pipes. This problem does not arise with plastic pipes.
- Regular cleaning of plumbing fixtures is the best remedy for fungus in the bathroom.
- After the removal procedure, you can spray vinegar around the room for a month to prevent the spores from multiplying again.
- If the work of the hood is not enough, then it is recommended to buy a special device that will dehydrate the air. Thus, the room will always be dry and there will be no favorable environment for fungus.
Vinegar prevents mold.
Use an air dehydrator.
These simple rules will help avoid the appearance of unpleasant fungus, which is quite difficult to remove completely. Not only the safety of the plumbing is at risk, but also the health of all household members, especially if children, pets or allergy sufferers live in the house. From the very beginning, it is better to prevent its occurrence, and when moving to a new apartment or during renovation, it is worth carrying out prevention: treating the surfaces with an antibacterial and antifungal agent. Don't forget to follow the important rules. You will provide yourself and your loved ones with the absence of allergies and harmful effects, and the question of how to remove fungus in the bathroom will be closed.